EAFC 1000A 12V Car Jump Starter Power Bank Portable Power Bank with USB Quick Charge & LED Light for Cars, Trucks, Motorcycles
EAFC 1000A 12V Car Jump Starter Power Bank Portable Power Bank with USB Quick Charge & LED Light for Cars, Trucks, Motorcycles
SPECIFICATIONS
Battery Capacity(mAh): 12000-18000
Brand Name: EAFC
Conversion Rate: >90%
External Testing Certification: CCC
Number Of Built-in Batteries: 4
Origin: Mainland China
Peak Current: 1200 A
Special Features: USB,Lighting,SOS Lighting
Voltage: 12 V
Never Fear a Dead Battery Again! The All-in-One Power Solution for Modern Drivers.
Key Features & Benefits
POWERFUL & VERSATILE: With a robust 1000A peak current, it reliably jump-starts gasoline vehicles up to 3.0L. Perfect for Car/Motorcycle/SUV/Hybird car/New energy vehicles/Pickup trucks.
* ALL-SEASON RELIABILITY: Engineered to perform in extreme conditions, from freezing -40°C winters to scorching +80°C summers. Your trustworthy companion all year round.
* SMART & SAFE: Features advanced circuit protection against short-circuits, reverse polarity, and overcharging. The clear digital display shows the exact battery level, so you're never caught off guard.
* 3-IN-1 EMERGENCY LIGHT: A bright LED flashlight with three modes—Continuous Light, SOS Rescue Signal, and Strobe Warning—enhancing your safety during nighttime emergencies.
* HIGH-SPEED PORTABLE CHARGER: Equipped with a USB port to quickly charge your iPhone, iPad, Android phones, and other digital devices on the go. It's more than a jump starter; it's a power bank for your life.
---
Solve These Common Driving Headaches
* ❌ Car won't start on a cold morning?
* ❌ Stranded with a dead battery and no one to help?
* ❌ Expensive and slow roadside assistance?
* ❌ Phone battery dying during a trip?
✅ Yes! The PowerCore Jump Starter is Your Solution!
Regain your independence and peace of mind. Compact, powerful, and ready when you are.
How to Use Your PowerCore (Simple & Safe)
Before First Use – Important Initial Setup:
Your PowerCore is shipped in a protective low-power mode. To activate it, please follow these steps:
1. Activate & Discharge: Press and hold the power button for 3 seconds to turn on the flashlight. Let it run for a few minutes.
2. Full Initial Charge: Connect the PowerCore to a power source and charge it fully for over 4 hours. This "deep charge" ensures maximum performance and longevity.
To Jump-Start Your Vehicle:
1. Check Charge: Ensure your PowerCore has at least 60% (3 bars)of charge.
2. Connect Clamps: Attach the clamps to the car battery securely:
RED clamp to the POSITIVE (+) terminal.
BLACK clamp to the NEGATIVE (-) terminal or a clean, unpainted metal part of the chassis.
Ensure the clamps have a firm, full-contact connection and do not touch each other.
3. Wait & Start: Wait 2-3 minutes for the power to stabilize. Then, start your car as you normally would.
4. Disconnect Immediately: Once the engine is running, remove the clamps within 30 seconds in the reverse order.
---
Safety Instructions & Warnings (Your Attention Please)
To ensure safety and prevent damage to your device, please always follow these rules:
DO NOT reverse the positive and negative clamps.
⚠️ DO NOT let the clamps touch each other.
⚠️ After a start attempt, wait for at least 1 minute before trying again.
⚠️ Always remove the clamps within 30 seconds of a successful start.
⚠️ Do not crank the engine for more than 5 seconds at a time.
Failure to follow these instructions may trip the internal safety fuse.
Frequently Asked Questions (FAQ)
Q1: I charged it for a long time, but it still shows 0%. Why?
A:This is normal after shipping. The device enters a sleep mode. Please continue charging for over 4 hours. It may take some time for the percentage to update from 0% to 1%.
Q2: The battery level shows 100% when I turn it on, but then drops to 0%. What should I do?
A: This indicates the battery needs calibration. Please long-press the button to turn on the flashlight for a while to discharge it. Then, recharge it fully to 100%. This deep cycle will recalibrate the power indicator.
---
Packing include
1 x PowerCore Jump Starter Unit
1 x Set of Jump-Start Clamps
1 x USB Charging Cable
1 x User Manual (with multi-language support, including clear EU safety standards)
Drive with Confidence. Drive with PowerCore.
Dual Boot Works Instantly
Safe current, strong start
Emergency starting power supply
3.0L Gaspline car
Supports gasoline vehicles within 12V/3.0L
Have You Ever Encountered This Situation?
I'll help you solve your troubles.Don't ask for help when your car stalls.
1.The car has been idle for too long and cannot be started when the car is used.
2.Forgot to turn off the lights when leaving the car and the battery ran out of power
3.The temperature is low and the battery is severely depleted and cannot be started normally.
Universal Diesel And Gasoline Vehicles
When the battery is low, it will start working again.
Even if the car is in a zero-voltage state, it can be started immediately
Supports 3.0L gasoline vehicles
Car/Motorcycle/SUV/Hybird car/New energy vehicles/Pickup trucks
Low Temperature Start Not Afraid Of Severe Cold
Intelligent power management IC, high temperature resistance
-20℃----Not afraid of the cold northern regions
+60℃---No fear of the high temperature inside the car in summer
LED Strong Lighting Three lighting modes to calmly respond to emergencies
Highlight lighting /SOS /Strobe
Intelligent Adaptive Digital Charging
Mobile phone charging and battery life are guaranteed
Powerful Performance Diesel-gas Dual Start Specially designed for car starting, suitable for 12V models
Three Simple StepsEven novices can start instantly
1 Connect:Connect the DO interface to the startup power supply
2 Clamping:Clamp the positive and negative ignition clips to the car battery correspondingly
3.lgnition:Return to the car and start the car. once the start is successful, immediately remove the power supply.
Product Details Quality Assurance
Reject copper plating and copper-clad aluminum, and only use pure copper wires.
Pure copper has low resistance and is more secure when starting the vehicle.
DO anti-reverse plug power interface
Insulated fully covered chuck, no leakage
Universal Diesel And Gasoline Vehicles
When the battery is low, it will start working again.
Even if the car is in a zero-voltage state, it can be started immediately
Car/Motorcycle/SUV/Hybird car/New energy vehicles/Pickup trucks
Low Temperature Start Not Afraid Of Severe Cold
Intelligent power management IC, high temperature resistance
-20℃----Not afraid of the cold northern regions
+60℃---No fear of the high temperature inside the car in summer
LED Strong Lighting Three lighting modes to calmly respond to emergencies
Highlight lighting /SOS /Strobe
Intelligent Adaptive Digital Charging
Mobile phone charging and battery life are guaranteed
Powerful Performance Diesel-gas Dual Start Specially designed for car starting, suitable for 12V models
Three Simple StepsEven novices can start instantly
1 Connect:Connect the DO interface to the startup power supply
2 Clamping:Clamp the positive and negative ignition clips to the car battery correspondingly
3.lgnition:Return to the car and start the car. once the start is successful, immediately remove the power supply.
Product Details Quality Assurance
Reject copper plating and copper-clad aluminum, and only use pure copper wires.
Pure copper has low resistance and is more secure when starting the vehicle.
DO anti-reverse plug power interface
Insulated fully covered chuck, no leakage
